Canon LASER CLASS 810 LASER CLASS 830i/810 Basic Operation Guide - Page 377

SYSTEM SETTINGS 7. POP ADDRESS 8. POP PASSWORD 9. POP INTERVAL 8. STARTUP TIME SET. 6. COMMUNICATIONS 1. E-MAIL/I-FAX ** 1. MAX TX DATA SIZE 2. DIVIDED OVER MAX 2. FAX SETTINGS 1. TX START SPEED 2. RX START SPEED 3. TX DOC. ARCHIVING 3. MEMORY LOCK OFF ON 1. PASSWORD 2. REPORT PRINT Enters the login name for access to the POP server (max. 32 characters). Enters the password for access to the POP server (max. 32 characters). Sets the interval you want the POP server to check for incoming e-mail. If the interval is set to 0, the POP server is not checked automatically (0MIN.-99MIN.). Sets the time period required to delay the startup of network communications for the machine (0SEC-300SEC). Sets the fax and e-mail communication. Sets the e-mail/I-fax communications. Sets the maximum data size for outgoing e-mail messages. If the e-mail message exceeds this data size limit, it is split up into several e-mail messages before being sent (0MB-99MB). Sets whether to divide a document into separate files when it is sent if its size exceeds the data size you specify. - OFF - ON Sets the facsimile communication. Sets the transmission start speed for faxes. (33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps) Sets the reception start speed for faxes. (33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps) Sets whether to use TX Document Archiving. - OFF - ON Sets whether to receive and store all documents in memory and not to print automatically. (See Reference Guide > Send/ Receive.) Disables memory lock reception. Enables memory lock reception. Registers the password that protects the authority for accessing to memory. Sets whether to print a report on memory lock reception. - OFF - ON Machine Settings 12-47