Canon PIXMA iP4000 iP4000 Quick Start Guide - Page 60
Printing Maintenance, Check the Print Head condition with the printed nozzle check pattern. - clean
View all Canon PIXMA iP4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing Maintenance (5) When the confirmation message is displayed, click OK. Print Head Cleaning starts when the POWER lamp starts blinking. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 30 to 40 seconds. (6) Read the message and click Print Check Pattern to print the nozzle check pattern. The nozzle check pattern is printed. 4 Check the Print Head condition with the printed nozzle check pattern. See "Printing the Nozzle Check Pattern" on page 49. z The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink tank if the remaining amount of ink is insufficient. See "Replacing an Ink Tank" on page 42. z If the problem remains after performing Print Head Cleaning three times, try Print Head Deep Cleaning. See "Print Head Deep Cleaning" on page 57. 56