Canon PIXMA iP4000 iP4000 Quick Start Guide - Page 79
Handling Error Messages - waste ink absorber
View all Canon PIXMA iP4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Troubleshooting Handling Error Messages When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Two flashes Three flashes Four flashes Five flashes Six flashes Eight flashes Nine flashes Possible Cause Try This Printer is out of Reload paper in the Sheet Feeder or Cassette and press the RESUME/CANCEL paper/Paper does button. not feed Paper jam/Paper Output Tray is closed Clear the jammed paper, reload paper in the printer, then press the RESUME/ CANCEL button. If the Paper Output Tray is closed, open it. See "Paper Jams" on page 72. Empty ink tank Press the RESUME/CANCEL button to resume printing with an empty ink tank. Replace it with a new ink tank immediately after the printing. It may damage the printer if you continue printing with an empty ink tank. See "Replacing an Ink Tank" on page 42. Print Head not installed/Print Head not installed correctly/Defective Print Head Install the Print Head. If the Print Head is already installed, remove the Print Head and check the electrical contacts for foreign matter, then reinstall. After reinstalling the Print Head, you may need to realign it. If this error still remains, the Print Head may be damaged. Contact the Customer Care Center. Inner Cover is open Close the Inner Cover and press the RESUME/CANCEL button. Waste ink absorber almost full The printer has a built-in waste ink absorber for the ink used during Print Head Cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact the Customer Care Center. A specified period of time has elapsed without receiving a response from the digital camera/The digital camera or digital video camcorder connected is not compatible with this printer Disconnect the camera cable, press the RESUME/CANCEL button and reconnect the cable. If the error is still unresolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this printer. Use a digital cameras or digital video camcorder compatible with this printer. 75