Canon PIXMA iP4000 iP4000 Quick Start Guide - Page 62
BJ Printer Utility - how to install
View all Canon PIXMA iP4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Printing Maintenance z When cleaning the print head of black ink tanks (for iP4000): select Black to clean the Print Head of Black (BCI-3eBK), Color to clean the Print Head of Black (BCI-6BK). z Clicking Initial Check Items displays the items to be checked before cleaning. (5) When the confirmation message is displayed, click OK. Print Head Deep Cleaning starts when the POWER lamp starts blinking. Do not perform any other operation until the Print Head Deep Cleaning finishes. This takes about one minute. 4 Print the nozzle check pattern to check the Print Head condition. See "Printing the Nozzle Check Pattern" on page 49. If a particular color is not printed properly, replace the ink tank of that color. See "Replacing an Ink Tank" on page 42. z If the print head nozzles are still not clean, open the Top Cover and ensure that there are sufficient ink levels in all ink tanks and turn off the printer. Be sure to perform another Print Head Deep Cleaning 24 hours after turning off the printer. z If this does not solve the problem, the Print Head may be worn out. Contact the Customer Care Center. 1 Ensure that the printer is on. 2 Open the BJ Printer Utility dialog box. (1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and then the Utilities folder. (2) Double-click the Printer Setup Utility icon. When using versions of Mac OS other than Mac OS X v.10.3.x, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility. When using versions of Mac OS other than Mac OS X v.10.3.x, select the name of your printer from the Name list and click Configure. (4) Select the name of your printer from the Product list and click Maintenance. 58