Canon PowerShot A510 PowerShot A520/A510 Camera User Guide - Page 36
Press the shutter, button all the way.
View all Canon PowerShot A510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Shooting - The Basics Pressing Halfway Pressing halfway automatically sets the exposure and focus. z Two beeps will sound when the camera has finished metering, and the upper indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green. z The lower indicator will blink yellow and the beep will sound one time if the subject is difficult to focus on. 6 Press the shutter button all the way. Pressing Fully Pressing fully releases the shutter. z You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound. z The upper indicator blinks green while data is recorded onto the memory card. z The picture appears for approximately three seconds on the LCD monitor, if it is on. 34 z See page 159 for settings that can be changed in this mode. z With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 36). z If the indicator blinks orange or yellow while you press the shutter button halfway, you can still press fully to take the shot. z Images are first saved into the camera's internal memory before being recorded onto the memory card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. z The beep and shutter sound can be set [On/ Off] in the [Set up] menu (p. 70). z Even when the shutter sound is set to [ , , (On)] (p. 74), no sound will be heard if [Mute] is set to [On]. z There is no shutter sound in movie mode. z Shots cannot be taken while the flash is charging.