Canon PowerShot S10 PowerShot S10/S20 Camera User Guide - Page 42
Press the SET button after the last image
View all Canon PowerShot S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3 Shoot the first frame. • Press the SET button again if you wish to change the image arrangement setting. • The settings for the exposure and white balance are locked at the values used for the first image. 4 Shoot the second image so that it overlaps the first. • Horizontal Example • 2 x 2 Example 40 • Pressing the / / / buttons returns the display to the previously captured images so that you can rerecord an image. 5 Repeat the previous steps to record additional frames. • A maximum of 26 images can be recorded in either the horizontal or vertical direction. 6 Press the SET button after the last image has been recorded. • Minor discrepancies in the overlapping portions can be corrected when the images are stitched together. • The zoom, flash on/off, exposure compensation, white balance and resolution settings can only be set for the first image in the series. • The digital zoom, image quality (gain, sharpness and contrast) and continuous, auto flash, red-eye reduction, AE lock, and exposure metering modes cannot be adjusted in this mode. • A TV cannot be used as the viewfinder in this mode.