Canon PowerShot S10 PowerShot S10/S20 Camera User Guide - Page 71
Troubleshooting
View all Canon PowerShot S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Troubleshooting Problem Camera will not operate Cause(s) Battery cover is open 2CR5 lithium battery inserted upside down Insufficient battery voltage (Display panel flashes "Lb") Incorrect battery type Camera will not record Poor contact between battery and camera terminals Mode Dial is set to the , (Play) or (PC) position Flash is charging ( icon flashes) Solution(s) • Ensure that the battery cover is firmly closed. • Insert the 2CR5 lithium battery so that its terminals touch the bottom of the battery chamber. • Insert a fully charged battery pack. • Replace the battery. • Use an approved AC power source. • Use a fully charged Battery Pack NB-5H or a 2CR5 lithium battery. • Wipe the battery terminals with a clean, dry cloth. • Set the Mode Dial to the (Auto), (Manual), or (Stitch Assist) position. • Wait until the flash charges, the icon stops flashing and the indicator shines a steady red to press the shutter button. Appendices 69