Canon PowerShot SX740 HS Camera User Guide - Page 118

Errors and Warnings If an error message is displayed, respond as follows. Error Codes ●● In case of problems with the camera, error codes (in the format Errxx) and recommended responses are displayed. Number Message and Response Card cannot be accessed. Reinsert/change card or 02 format card with camera. → Reinsert the memory card, use a different card, or format the card. Cannot save images because card is full. Replace 04 card. → Use a different memory card, erase unneeded images, or format the card. 10, 20, 30, 40, An error prevented shooting. Turn the camera off and 50, 60, 70, on again or re-install the battery. 80, 99 → Use the power button or reinsert the battery pack. * If the problem persists, write down the error code (Errxx) and contact a Customer Support Help Desk. Wi-Fi Device with same IP address exists on selected network ●● Reset the IP address so that it does not conflict with another. Disconnected/Could not send the image ●● You may be in an environment where Wi-Fi signals are obstructed. ●● Avoid using the camera's Wi-Fi function around microwave ovens and other devices that operate on the 2.4 GHz band. ●● Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices. ●● Check the connected device to make sure it is not experiencing errors. Not enough free space on server ●● Delete unneeded images on the server and check the free space before you attempt transmission again. Check the network settings ●● Make sure your computer can connect to the Internet under the current network settings. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Wireless Features Setting Menu Accessories Appendix Index 118