Canon ZR25MC ZR25 MC Instruction Manual - Page 33
If your TV or VCR has audio/video input terminals
UPC - 013803000733
View all Canon ZR25MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
If your TV (or VCR) has audio/video input terminals E AV IN/OUT STV-250N Stereo Video Cable MIC INPUT VIDEO AUDIO L R Mastering the Basics When connecting for playback on a TV screen, make sure the AV/headphone terminal is switched to AV. If PHONES appears in the display, switch the terminal. • Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the red audio terminal R (right). Connect the yellow plug to the yellow video terminal VIDEO. • If you are connecting the camcorder to a TV, set the TV/VIDEO selector on the television to VIDEO. • If you are connecting the camcorder to a VCR, set the input selector on the VCR to LINE. Notes: • If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volume turned down as long as the camcorder's audio terminals are connected. If the sound from the TV speakers is picked up by the microphone, an unpleasant high-pitched squeal, called feedback, may be produced. • For TVs having the Video ID-1 system: If you connect the camera to the TV's S terminal or video in terminal, recordings made in the 16:9 mode for wide screen TVs will automatically play back in wide screen mode on the TV screen. 33