Canon imageCLASS D880 imageCLASS D800 Series Printer Guide - Page 74
Forms, Properties, Selected Paper, Change Paper, Available Paper, Print Server Properties, Millimeter
View all Canon imageCLASS D880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Printer Properties ■ Paper Selection Tab This printer driver supports three custom paper sizes. Using the custom forms defined on the Forms tab in the print server's Properties dialog box, you can add information about the custom paper sizes. Form definitions must conform to the printer's specifications. 3 Selected Paper dialog box gives you the ability to define up to three custom paper sizes (Size 1, 2, & 3). Select the size and click the Change Paper... button. Change Paper opens the Available Paper dialog box. This dialog box contains the definition for the sizes you have defined in the Print Server Properties (refer to p. 3-21 for information on how to setup custom paper sizes). Only paper sizes that are supported by your printer will be available in this dialog box. Paper size can range in height from 5" to 14" (127mm to 355.6mm), width 3" to 8.5" (76.2mm to 215.9mm), and must have a minimum of 0.2" (5mm) margin on all sides. You can select either Millimeter or Inch to switch the unit of measurement displayed on the screen. When you choose a size in the list and click OK, the size information is copied to the selected paper size you selected on the Selected Paper list in the Paper Selection tab. 3-20