Canon imageFORMULA ScanFront 300 ScanFront 300/300P Instructions - Page 51
Display Language Setting, Network Test
View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
❏ Display Language Setting You can select the language displayed on touch panel. If you change this setting, restart the scanner. Chapter 3 ScanFront Setup ❏ Switch to Web Application Mode (from Standard Mode of ScanFront 330 Only) Switch to Web Application Mode when using the ScanFront 330 in Standard Mode. Hint The display language setting can also be configured in [Language/Timezone] on the Web Menu (Administrator Mode) (see p. 6-30). ❏ Network Test Confirm whether communication is enabled between the ScanFront and other devices on the network. Enter the IP address of a device and press the [Execute] button to ping the specified IP address and confirm whether communication with the device is enabled. If you execute switching to Web Application Mode, ScanFront restarts and switches to Web Application Mode. IMPORTANT There is no data compatibility between Standard Mode and Web Application Mode. Before switching to Web Application Mode, back up the data as a safety precaution. 3-12