Canon imageFORMULA ScanFront 400 CAC/PIV ScanFront 400 CAC/PIV Configuration G - Page 90
The SMB Settings are set
View all Canon imageFORMULA ScanFront 400 CAC/PIV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4. If you want to enable the SMBV1 protocol, press the [Enable] check box next to . A green checkmark appears in the [Enable] check box. NOTE If you want to resolve NetBIOS host names by using a WINS server, enter the WINS server's IP address in the [WINS Server IP] text box. 5. Press [OK]. The SMB Settings are set. ScanFront 400 CAC/PIV V1.3.1 Configuration Guide 90
ScanFront 400 CAC/PIV V1.3.1 Configuration Guide
90
4.
If you want to enable the SMBV1 protocol, press the [Enable] check box next to
<Allow SMBV1>.
A green checkmark appears in the [Enable] check box.
NOTE
If you want to resolve NetBIOS host names by using a WINS server, enter the
WINS server’s IP address in the [WINS Server IP] text box.
5.
Press [OK].
The SMB Settings are set.