Canon imageFORMULA ScanFront 400 CAC/PIV ScanFront 400 CAC/PIV Configuration G - Page 95
The Device Detail Settings are set
View all Canon imageFORMULA ScanFront 400 CAC/PIV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
7. Press [ON] or [OFF] next to to enable or disable remote access. The setting is set to 'ON' by default, and can only be modified from the ScanFront 400 CAC/PIV device's control panel. 8. From the [Reduction ratio adjustment (%)] drop-down list, select how low or high you want the device's reduction percentage. You can select from '-3.0 (LOW)' to '3.0 (HIGH)'. The default reduction ratio is '0.0'. 9. Press [OK]. The Device Detail Settings are set. 95 ScanFront 400 CAC/PIV V1.3.1 Configuration Guide
95
ScanFront 400 CAC/PIV V1.3.1 Configuration Guide
7.
Press [ON] or [OFF] next to <Allow remote operation. (Editable at device only.)>
to enable or disable remote access.
The <Allow remote operation> setting is set to ‘ON’ by default, and can only be
modified from the ScanFront 400 CAC/PIV device’s control panel.
8.
From the [Reduction ratio adjustment (%)] drop-down list, select how low or high
you want the device’s reduction percentage.
You can select from ‘-3.0 (LOW)’ to ‘3.0 (HIGH)’.
The default reduction ratio is ‘0.0’.
9.
Press [OK].
The Device Detail Settings are set.