Canon imagePROGRAF GP-300 imagePROGRAF GP-300 / GP-200 Setup Guide - Page 2

ENGLISH The illustrations in this manual are using the GP-300 as an example for explanation. Note that your printer may look different from these illustrations in some cases. Overview of Setup Set up the printer using the following procedure. If an error message appears during setup or other problems occur, refer to "Responding to Messages" on p. 14. 1 Removing the Packaging Material 4 Page 2 Assembling the Printer Stand 4 Page 3 Installing the Printer 4 Page 4 Turning On the Printer 5 Page Installation Space When installing the printer, it is recommended that you secure the following space around the printer. Important ● The printer stand may not be included with the model you purchased. Please note that the required space differs depending on whether the options are used or not. ● The space required in front of the printer varies depending on how the basket is used. ■ GP-300 Required space* (W x D x H) 66.5 × 57.9 × 53.6 inches 1,689 × 1,470 × 1,360 mm 11.8 inches (300 mm) 5 Installing the Ink Tanks 6 Page 6 Installing the Print Head 8 Page 7 Performing Print Head Adjustment Page 10 8 Selecting the Method of Connecting to Your Computer Page 11 9 Installing the Software on Your Computer Page 12 Loading Paper About the Cleaning Brush Printing From a Smartphone or Tablet Displaying the Online Manual Sending Information To Canon Trademarks Responding to Messages Page 13 Page 13 Page 13 Page 13 Page 13 Page 13 Page 14 7.9 inches (200 mm) 23.6 inches (600 mm)* * When using the SD-33 printer stand ■ GP-200 Required space* (W x D x H) 54.5 × 57.9 × 53.6 inches 1,382 × 1,470 × 1,360 mm Required space** (W x D x H) 54.5 × 53.5 × 29.1 inches 1,382 × 1,358 × 739 mm 23.6 inches (600 mm)** 7.9 inches (200 mm) 23.6 inches (600 mm)* * When using the SD-24 printer stand ** When not using the printer stand 7.9 inches (200 mm) 11.8 inches (300 mm) 0.39 inches (10 mm)** 7.9 inches (200 mm) 1