Cisco 10000-2P2-2DC Software Guide - Page 154

Session Limit Per VRF Chapter 4 Configuring Multiprotocol Label Switching exit session-limit 5 vpdn-group group3 accept-dialin protocol any exit no source vpdn-template Example 4-6 creates a default VPDN template and three VPDN groups named groupA, groupB, and groupC. As indicated in the default VPDN template configuration, the maximum combined number of sessions allowed for all VPDN groups associated with the default template is 10 sessions. The local name of the default VPDN template is local-name. Example 4-6 also creates an additional VPDN template named templateA, which has a session limit of 50. The combined number of sessions for all VPDN groups associated with templateA cannot exceed 50 concurrent sessions, regardless of the session limits set for the individual VPDN groups. VPDN groupA and groupB are attached to VPDN templateA and each group has an individual session limit of 30 sessions. Because groupA and groupB are attached to VPDN templateA, they use the hostname host1 as their local name. In Example 4-6, the source vpdn-template command is not used to associate VPDN groupC with a specific VPDN template. Therefore, by default, VPDN groupC is attached to the default VPDN template, which has a group session limit of 10. VPDN groupC inherits the local name local-name from the default VPDN template. Example 4-6 Configuring Session Limit Per VRF hostname host1 vpdn-template group session-limit 10 local name local-name exit vpdn-template templateA group session-limit 50 exit vpdn-group groupA accept-dialin protocol any exit source vpdn-template templateA session-limit 30 exit vpdn-group groupB accept-dialin protocol any exit source vpdn-template templateA session-limit 30 exit vpdn-group groupC accept-dialin protocol any 4-20 Cisco 10000 Series Router Software Configuration Guide OL-2226-23