Cisco SPA962-EU Administration Guide - Page 140
Call Feature Settings, Refer-To Target Contact - auto answer
UPC - 745883578504
View all Cisco SPA962-EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Ext 1/2/3/4/5/6 Tab Referee Bye Delay Refer-To Target Contact Sticky 183 Auth INVITE Chapter 5 SPA900 Series Phone Field Reference For the Referee Bye Delay, enter the appropriate period of time in seconds. The default is 0. To contact the refer-to target, select yes. Otherwise, select no. The default is no. If this feature is enabled, the IP telephony ignores further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. The default is no. When enabled, authorization is required for initial incoming INVITE requests from the SIP proxy. Call Feature Settings Field Blind Attn-Xfer Enable MOH Server Message Waiting Auth Page Default Ring Auth Page Realm Description Enables the 900 Series phone to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the 900 Series phone performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. The default is no. User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is toggled by a message from the SIP proxy to indicate if a message is waiting. The default is No. Specifies whether to authenticate the invite before auto answering a page. The Auto Answer Page parameter, on the Supplementary Services section of the User tab, is set to Yes by default. The default is No. Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. 5-42 Linksys 900 Series IP Phone Administrator Guide Document Version 3.0