Cisco SPA962-EU Administration Guide - Page 92
Non DHCP IP Address, 9.9 Non DHCP Subnet Mask, 9.10 Non DHCP Default Route, 9.11 Non DHCP DNS 1
UPC - 745883578504
View all Cisco SPA962-EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
9 Network Chapter 4 LCD Command Reference Guide 9.8 Non DHCP IP Address Shortcut: Menu, 9, 8, ip_address, ok To manually set the IP address, press 8 from the Network menu, or scroll down to highlight Non DHCP IP Address and press the select soft key. Then press the edit soft key. The display shows the option to enter an IP address. enter the IP address here. This IP address is always used by the phone (it is a static IP address). After entering IP address, press ok. 9.9 Non DHCP Subnet Mask Shortcut: Menu, 9, 9, subnet_mask, ok To manually set the subnet mask, press 9 from the Network menu, or scroll down to highlight Non DHCP Subnet Mask and press the select soft key. Then press the edit soft key. After entering the subnet mask, press ok. 9.10 Non DHCP Default Route Shortcut: Menu, 9, 10, IP ADDRESS, ok To edit the default gateway (router), press 10 or scroll down to highlight Non DHCP Default Route and press the select soft key. Then press the edit soft key. After entering the default route, press ok.. 9.11 Non DHCP DNS 1 Shortcut: Menu, 9, 11, ip_address, ok To edit the primary DNS server used by the phone, press 11 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. 9.12 Non DHCP DNS 2 Shortcut: Menu, 9, 12, ip_address, ok To edit the secondary DNS server used by the phone, press 12 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. 9.13 Non DHCP NTP Server 1 Shortcut: Menu, 9, 13, ip_address, ok The Network Time Protocol (NTP) server sets the time used by the IP phone. To edit the primary NTP server used by the phone, press 13 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. 4-10 Linksys 900 Series IP Phone Administrator Guide Document Version 3.0