Cisco SR224 User Guide - Page 17

Configuration using the Console Interface - management

Get Cisco SR224 - Small Business Unmanaged Switch PDF manuals and user guides
UPC - 745883556526
View all Cisco SR224 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

24-port 10/100 + 2-Port Gigabit Switch with WebView Chapter 4: Configuration using the Console Interface Overview The Switch features a menu-driven console interface for basic switch configuration. You can easily manage your network from the screens through the console port. Before you can use the console interface, you will need to configure the HyperTerminal application. Configuring the HyperTerminal Application 1. Click the Start button. Select Accessories and then Communications. HyperTerminal should be one of the options listed in this menu. Select HyperTerminal. Running the Hyper Terminal utility program. 2. Enter a name for this connection. In the example below, the name of connection is SRW224. Select an icon for the application. Click OK. 3. Select a port to communicate with the switch. Select COM1, COM2, or TCP/IP. 4. Set the serial port settings, as follows, then click OK. Bits per Second: 19200 Databits: 8 Parity: None Stop bits: 1 Flow control: None Figure 4-1: Finding HyperTerminal Figure 4-2: Connection Description Chapter 4: Configuration using the Console Interface Overview Figure 4-3: Connect To 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
11
Chapter 4: Configuration using the Console Interface
Overview
24-port 10/100 + 2-Port Gigabit Switch with WebView
Chapter 4: Configuration using the Console Interface
Overview
The Switch features a menu-driven console interface for basic switch configuration. You can easily manage your
network from the screens through the console port. Before you can use the console interface, you will need to
configure the HyperTerminal application.
Configuring the HyperTerminal Application
1.
Click the
Start
button. Select
Accessories
and then
Communications
. HyperTerminal should be one of the
options listed in this menu. Select
HyperTerminal
. Running the Hyper Terminal utility program.
2.
Enter a name for this connection. In the example below, the name of connection is SRW224. Select an icon for
the application. Click
OK
.
3.
Select a port to communicate with the switch. Select
COM1
,
COM2
, or
TCP/IP
.
4.
Set the serial port settings, as follows, then click
OK
.
Bits per Second:
19200
Databits:
8
Parity:
None
Stop bits:
1
Flow control:
None
Figure 4-2: Connection Description
Figure 4-1: Finding HyperTerminal
Figure 4-3: Connect To