Cisco WUSB54G User Guide - Page 111
IP Filter List, Filters Properties, Source address, Destination address, D-4: IP Filter LIst
View all Cisco WUSB54G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Wireless-G VPN Broadband Router 3. The IP Filter List screen should appear. Enter an appropriate name, such as win->Router, for the filter list, and de-select the Use Add Wizard check box. Then, click the Add button. 4. The Filters Properties screen will appear. Select the Addressing tab. In the Source address field, select My IP Address. In the Destination address field, select A specific IP Subnet, and fill in the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (These are the Router's default settings. If you have changed these settings, enter your new values.) 5. If you want to enter a description for your filter, click the Description tab and enter the description there. Figure D-4: IP Filter LIst 6. Click the OK button. Then, click the OK or Close button on the IP Filter List window. Figure D-5: Filters Properties Appendix D: Configuring IPSec between a Windows 2000 or XP Computer and the Router How to Establish a Secure IPSec Tunnel Figure D-6: New Rule Properties 101