Cisco WUSB54G User Guide - Page 37

Wireless-G VPN Broadband Router The Wireless Tab - Wireless Network Access This screen allows you to control access to your wireless network. Wireless Network Access Access List. To allow the designated computers to access your network, select the Permit to access radio button. To block the designated computers from accessing your wireless network, select the Prevent from accessing radio button. Click Disabled to disable the access function. MAC 1-20. Enter the MAC addresses of the designated computers. For a more convenient way to add MAC addresses, click the Select MAC Address From Networked Computers button. The Networked Computers screen will appear. Select the MAC Addresses you want. Then click the Select button. Click the Refresh button if you want to refresh the screen. Click the Close button to return to the previous screen. If you want detailed instructions on how to find the MAC address of a specific computer, refer to "Appendix F: Finding the MAC Address or IP Address for Your Ethernet Adapter." When you have finished making changes to the screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. For help information, click More. Figure 6-17: Wireless Tab - Wireless Network Access Chapter 6: Configuring the Wireless-G VPN Broadband Router The Wireless Tab - Wireless Network Access Figure 6-18: Networked Computers 27