Cisco WUSB54G User Guide - Page 26

Static IP, PPPoE

Get Cisco WUSB54G PDF manuals and user guides View all Cisco WUSB54G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Wireless-G VPN Broadband Router Static IP If you are required to use a permanent IP address to connect to the Internet, then select Static IP. IP Address. This is the Router's IP address, when seen from the WAN, or the Internet. Your ISP will provide you with the IP Address you need to specify here. Subnet Mask. This is the Router's Subnet Mask, as seen by external users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask. Default Gateway. Your ISP will provide you with the Default Gateway Address, which is the ISP server's IP address. Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address. When you have finished making changes to the screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. PPPoE Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE. User Name and Password. Enter the User Name and Password provided by your ISP. Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates. Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds. When you have finished making changes to the screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. Chapter 6: Configuring the Wireless-G VPN Broadband Router The Setup Tab - Basic Setup Figure 6-3: Internet Connection Type - Static IP static ip address: a fixed address assigned to a computer or device connected to a network. subnet mask: an address code that determines the size of the network default gateway: a device that forwards Internet traffic from your local area network Figure 6-4: Internet Connection Type - PPPoE pppoe: a type of broadband connection that provides authentication (username and password) in addition to data transport 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
16
Chapter 6: Configuring the Wireless-G VPN Broadband Router
The Setup Tab - Basic Setup
Wireless-G VPN Broadband Router
Static IP
If you are required to use a permanent IP address to connect to the Internet, then select
Static IP
.
IP Address
. This is the Router’s IP address, when seen from the WAN, or the Internet. Your ISP will provide
you with the IP Address you need to specify here.
Subnet Mask
. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your
ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway
. Your ISP will provide you with the Default Gateway Address, which is the ISP server’s IP
address.
Primary DNS (Required)
and
Secondary DNS (Optional)
. Your ISP will provide you with at least one DNS
(Domain Name System) Server IP Address.
When you have finished making changes to the screen, click the
Save Settings
button to save the changes,
or click the
Cancel Changes
button to undo your changes.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If
you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do,
you will have to enable PPPoE.
User Name and Password
. Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time
. You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the
Max Idle Time
field, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Keep Alive Option: Redial Period
. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to
Keep Aliv
e. In the
Redial Period
field, you specify how often you
want the Router to check the Internet connection. The default Redial Period is 30 seconds.
When you have finished making changes to the screen, click the
Save Settings
button to save the changes,
or click the
Cancel Changes
button to undo your changes.
Figure 6-3: Internet Connection Type - Static IP
Figure 6-4: Internet Connection Type - PPPoE
static ip address
: a fixed address
assigned to a computer or device
connected to a network.
pppoe
: a type of broadband connection that
provides authentication (username and
password) in addition to data transport
subnet mask
: an address code that
determines the size of the network
default gateway
: a device that forwards
Internet traffic from your local area network