Cisco WUSB54G User Guide - Page 112
Filter List 2: Router ->win, New Rule Properties, IP Filter List, Filters Properties
View all Cisco WUSB54G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Wireless-G VPN Broadband Router Filter List 2: Router ->win 7. The New Rule Properties screen will appear. Select the IP Filter List tab, and make sure that win -> Router is highlighted. Then, click the Add button. 8. The IP Filter List screen should appear. Enter an appropriate name, such as Router->win for the filter list, and de-select the Use Add Wizard check box. Click the Add button. 9. The Filters Properties screen will appear. Select the Addressing tab. In the Source address field, select A specific IP Subnet, and enter the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (Enter your new values if you have changed the default settings.) In the Destination address field, select My IP Address. 10. If you want to enter a description for your filter, click the Description tab and enter the description there. Figure D-7: IP Filter List 11. Click the OK or Close button and the New Rule Properties screen should appear with the IP Filer List tab selected. There should now be a listing for "Router -> win" and "win -> Router". Click the OK (for WinXP) or Close (for Win2000) button on the IP Filter List window. Figure D-8: Filters Properties Appendix D: Configuring IPSec between a Windows 2000 or XP Computer and the Router How to Establish a Secure IPSec Tunnel Figure D-9: New Rule Properties 102