Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 100
Weight, Remove the Phillips PM2.5×6.5 screws
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Weight Before removing the weight, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Service door (see Service door on page 49) ● WLAN module (see WLAN module on page 52) ● Hard drive (see Hard drive on page 70) ● Top cover (see Top cover/keyboard on page 55) ● USB board (see USB board on page 69) ● Display assembly (see Display assembly on page 61) ● System board (see System board on page 73) Remove the weight: 1. Remove the Phillips PM2.5×6.5 screws (1) that secure the weight to the computer. 2. Remove the weight from the computer (2). Reverse this procedure to install the weight. 92 Chapter 4 Removal and replacement procedures