Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 99
Hard drive connector, Hard drive see
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Hard drive connector Description Hard drive connector Spare part number 747240-001 Before removing the hard drive connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Service door (see Service door on page 49) ● WLAN module (see WLAN module on page 52) ● Hard drive (see Hard drive on page 70) ● Top cover (see Top cover/keyboard on page 55) ● System board (see System board on page 73) Remove the hard drive connector: 1. Remove the cable from the clips built into the computer chassis (1). 2. Remove the hard drive connector (2). Reverse this procedure to install the hard drive connector. Component replacement procedures 91