Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 76
If replacing the display enclosure, be sure that the other subcomponents including the webcam
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6. To remove the display/webcam cable, release the webcam connector (1), webcam cable (2), and display cable (3) from the routing path built into the display enclosure. 7. If replacing the display enclosure, be sure that the other subcomponents (including the webcam/ microphone module, the antenna receivers, and all associated cables and hardware) are transferred to the new enclosure. Reverse this procedure to reassemble and install the display assembly. 68 Chapter 4 Removal and replacement procedures
6.
To remove the display/webcam cable, release the webcam connector
(1)
, webcam cable
(2)
, and display
cable
(3)
from the routing path built into the display enclosure.
7.
If replacing the display enclosure, be sure that the other subcomponents (including the webcam/
microphone module, the antenna receivers, and all associated cables and hardware) are transferred to
the new enclosure.
Reverse this procedure to reassemble and install the display assembly.
68
Chapter 4
Removal and replacement procedures