Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 67
Power button board, Position the top cover upside down with the front toward you.
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Power button board Description Power button board (includes cable) Spare part number 747251-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: 5. Remove the service door (see Service door on page 49). 6. Remove the top cover (see Top cover/keyboard on page 55). To remove the power button board: 1. Position the top cover upside down with the front toward you. 2. Lift the cable to disengage it from the top cover (1). 3. Remove the two Phillips PM2.0×3.0 screws (2) that secure the power button board to the top cover. 4. Remove the power button board and cable (3). Reverse this procedure to install the power button board and cable. Component replacement procedures 59