Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 96
Card reader board, Remove the card reader board
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Card reader board Description Card reader board (includes cable) Spare part number 747254-001 Before removing the card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: ● Service door (see Service door on page 49) ● WLAN module (see WLAN module on page 52) ● Top cover (see Top cover/keyboard on page 55) ● System board (see System board on page 73) Remove the card reader board: 1. Position the system board upside down. 2. Disconnect the cable from the system board (1). 3. Remove the two Phillips PM2.5×4.0 screws (2) that secure the card reader board to the system board. 4. Remove the card reader board (3). Reverse this procedure to install the card reader board. 88 Chapter 4 Removal and replacement procedures