Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 57
Service door, Remove the service door screw
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Service door NOTE: The service door is available in the Plastics Kit. Description Plastics Kit Spare part number 747255-001 Before removing the service door, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 43). To remove the service door: 1. Remove the service door screw (1). 2. Slide the service door toward the front of the computer (2), and then lift up and remove the service door (3). Reverse this procedure to install the service door. Component replacement procedures 49