Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 70
CAUTION, Support the display assembly when removing the following screws. Failure to support
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. Remove the battery (see Battery on page 43). 5. Disconnect the WLAN module antenna cables from the WLAN module (see WLAN module on page 52). 6. Remove the following components: ● Service door (see Service door on page 49) ● Top cover (see Top cover/keyboard on page 55) To remove the display assembly: 1. Disengage the adhesive and disconnect the display panel cable (1) from the system board. 2. Remove the display panel cable from its routing path (2). 3. Release the wireless antenna cables from the clips (3) built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 4. Remove the five Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer. 62 Chapter 4 Removal and replacement procedures