Compaq 14-a100 14 Notebook PC 14 TouchSmart Notebook PC 14 Notebook PC 14 Touc - Page 83
Remove the seven Phillips PM2.5×5.0 screws, Lift the plastic tape from atop the fan
View all Compaq 14-a100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
2. Position the computer upright, and then disconnect the following cables from the system board: (2): Speaker cable (3): USB board cable (4): Optical drive connector cable 3. Remove the seven Phillips PM2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the plastic tape from atop the fan (2). Component replacement procedures 75
2.
Position the computer upright, and then disconnect the following cables from the system board:
(2)
: Speaker cable
(3)
: USB board cable
(4)
: Optical drive connector cable
3.
Remove the seven Phillips PM2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the plastic tape from atop the fan
(2)
.
Component replacement procedures
75