Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 67
Removing the Modem/Network Interface Card, board tilts up to a 45-degree angle.
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and Replacement Procedures 6. Disconnect the modem/NIC cable from the modem/NIC board 1 (Figure 5-4). 7. Slide the modem/NIC cable into the mini PCI compartment until it clears the modem/NIC board 2. 8. Spread the retaining tabs to release the modem/NIC 3. The board tilts up to a 45-degree angle. 9. Remove the modem/NIC by pulling it away from the connector at a 45-degree angle. Figure 5-4. Removing the Modem/Network Interface Card Reverse the above procedure to install the modem/NIC. 5-8 Maintenance and Service Guide
5–8
Maintenance and Service Guide
Removal and Replacement Procedures
6.
Disconnect the modem/NIC cable from the modem/NIC
board
1
(Figure 5-4).
7.
Slide the modem/NIC cable into the mini PCI compartment
until it clears the modem/NIC board
2
.
8.
Spread the retaining tabs to release the modem/NIC
3
. The
board tilts up to a 45-degree angle.
9.
Remove the modem/NIC by pulling it away from the
connector at a 45-degree angle.
Figure 5-4. Removing the Modem/Network Interface Card
Reverse the above procedure to install the modem/NIC.