Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 71
LED Board
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Removal and Replacement Procedures 3. Remove the three black TM2 × 4 screws 1 that secure the keyboard to the top cover and base enclosure (Figure 5-7). 4. Swing the back edge of the keyboard up and forward 2 and rest the keyboard on the top cover. 5. Release the ZIF connector 3 to which the keyboard cable is connected and disconnect the keyboard cable 4. 6. Remove the keyboard. Figure 5-7. Removing the Keyboard Reverse the above procedure to install the keyboard. 5.9 LED Board LED Board Spare Part Number Information LED board 251631-001 1. Prepare the computer for disassembly (Section 5.3). 5-12 Maintenance and Service Guide
5–12
Maintenance and Service Guide
Removal and Replacement Procedures
3.
Remove the three black TM2 × 4 screws
1
that secure the
keyboard to the top cover and base enclosure (Figure 5-7).
4.
Swing the back edge of the keyboard up and forward
2
and
rest the keyboard on the top cover.
5.
Release the ZIF connector
3
to which the keyboard cable is
connected and disconnect the keyboard cable
4
.
6.
Remove the keyboard.
Figure 5-7. Removing the Keyboard
Reverse the above procedure to install the keyboard.
5.9 LED Board
1.
Prepare the computer for disassembly (Section 5.3).
LED Board
Spare Part Number Information
LED board
251631-001