Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 73
Removing the LED Board Cable,
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and Replacement Procedures ✎ The LED board cable is included in the Cable Kit (spare part number 251639-001). To remove the LED board cable from the system board: 1. Release the ZIF connector 1 to which the LED board cable is connected and disconnect the LED board cable 2 (Figure 5-9). 2. Remove the LED board cable 3. Figure 5-9. Removing the LED Board Cable Reverse the above procedure to install the LED board and LED board cable. 5-14 Maintenance and Service Guide
5–14
Maintenance and Service Guide
Removal and Replacement Procedures
✎
The LED board cable is included in the Cable Kit (spare part
number 251639-001).
To remove the LED board cable from the system board:
1.
Release the ZIF connector
1
to which the LED board cable is
connected and disconnect the LED board cable
2
(Figure 5-9).
2.
Remove the LED board cable
3
.
Figure 5-9. Removing the LED Board Cable
Reverse the above procedure to install the LED board and LED
board cable.