Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 72
Remove the LED cover Removing the LED Board
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Removal and Replacement Procedures 2. Remove the LED cover (Section 5.6). 3. Remove the microphone (Section 5.7). 4. Remove the keyboard (Section 5.8). 5. Release the ZIF connector 1 to which the LED board cable is connected and disconnect the LED board cable 2 (Figure 5-8). 6. Remove the two black TM2 × 4 screws 3 that secure the LED board to the top cover. 7. Remove the LED board 4. Figure 5-8. Removing the LED Board Maintenance and Service Guide 5-13
Removal and Replacement Procedures
Maintenance and Service Guide
5–13
2.
Remove the LED cover (Section 5.6).
3.
Remove the microphone (Section 5.7).
4.
Remove the keyboard (Section 5.8).
5.
Release the ZIF connector
1
to which the LED board cable is
connected and disconnect the LED board cable
2
(Figure 5-8).
6.
Remove the two black TM2 × 4 screws
3
that secure the
LED board to the top cover.
7.
Remove the LED board
4
.
Figure 5-8. Removing the LED Board