Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 79
Removing the Top Cover Screws Continued, on each side of the external
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removal and Replacement Procedures 5. Remove the following screws: ❏ two pewter TM2 × 8 screws 1 that secure the top cover to the base enclosure (Figure 5-13) ❏ two black TM2 × 4 screws 2 from the rear panel ❏ two 5.0 mm screwlocks 3 on each side of the external monitor connector 6. Use a 9/64" hex wrench to remove the two bushing guides 4 on each side of the docking connector. Figure 5-13. Removing the Top Cover Screws (Continued) 5-20 Maintenance and Service Guide
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
5.
Remove the following screws:
❏
two pewter TM2 × 8 screws
1
that secure the top cover
to the base enclosure (Figure 5-13)
❏
two black TM2 × 4 screws
2
from the rear panel
❏
two 5.0 mm screwlocks
3
on each side of the external
monitor connector
6.
Use a 9/64” hex wrench to remove the two bushing guides
4
on each side of the docking connector.
Figure 5-13. Removing the Top Cover Screws (Continued)