Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 80
Removing the Top Cover, The LED board cable is included in the Cable Kit spare part
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removal and Replacement Procedures 7. Lift up the back edge of the top cover 1 until the TouchPad cable 2 prevents it from lifting any farther (Figure 5-14). 8. Release the ZIF connector 3 to which the TouchPad cable is connected and disconnect the TouchPad cable 4. ✎ The LED board cable is included in the Cable Kit (spare part number 251639-001). Figure 5-14. Removing the Top Cover 9. Remove the top cover. Reverse the above procedure to install the top cover. Maintenance and Service Guide 5-21
Removal and Replacement Procedures
Maintenance and Service Guide
5–21
7.
Lift up the back edge of the top cover
1
until the TouchPad
cable
2
prevents it from lifting any farther (Figure 5-14).
8.
Release the ZIF connector
3
to which the TouchPad cable is
connected and disconnect the TouchPad cable
4
.
✎
The LED board cable is included in the Cable Kit (spare part
number 251639-001).
Figure 5-14. Removing the Top Cover
9.
Remove the top cover.
Reverse the above procedure to install the top cover.