Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 87

Removing the Charger Board, and center

Get Compaq Evo Notebook n200 PDF manuals and user guides View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Removal and Replacement Procedures 3. Remove the two silver PM1x6 screws 1 that secure the charger board to the system board (Figure 5-18). 4. Turn the system board top side up with the stereo speaker and headphone jacks facing you. 5. Lift up on the left front side 2 and center 3 of the charger board to disconnect it from the system board. Figure 5-18. Removing the Charger Board Ä CAUTION: Do not lift the charger board by the right side 4. The material on the right side of the board is thinner and more prone to damage. Failure to follow this caution can result in damage to the charger board and the computer. 6. Remove the charger board. Reverse the above procedure to install the charger board. 5-28 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
5–28
Maintenance and Service Guide
Removal and Replacement Procedures
3.
Remove the two silver PM1x6 screws
1
that secure the
charger board to the system board (Figure 5-18).
4.
Turn the system board top side up with the stereo speaker and
headphone jacks facing you.
5.
Lift up on the left front side
2
and center
3
of the charger
board to disconnect it from the system board.
Figure 5-18. Removing the Charger Board
Ä
CAUTION:
Do not lift the charger board by the right side
4
. The
material on the right side of the board is thinner and more prone to
damage. Failure to follow this caution can result in damage to the
charger board and the computer.
6.
Remove the charger board.
Reverse the above procedure to install the charger board.