Compaq Evo Notebook n200 Maintenance and Service Guide Compaq Evo N200 Series - Page 89
Removing the Modem/NIC Cable, the docking connector
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Removal and Replacement Procedures 3. Disconnect the modem/NIC cable from the system board 1 (Figure 5-19). 4. Remove the modem/NIC cable 2. ✎ When installing the modem/NIC cable, route the cable between the docking connector 3 and the mini PCI connector 4. Figure 5-19. Removing the Modem/NIC Cable Reverse the above procedure to install the modem/NIC cable. 5-30 Maintenance and Service Guide
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
3.
Disconnect the modem/NIC cable from the system board
1
(Figure 5-19).
4.
Remove the modem/NIC cable
2
.
✎
When installing the modem/NIC cable, route the cable between
the docking connector
3
and the mini PCI connector
4
.
Figure 5-19. Removing the Modem/NIC Cable
Reverse the above procedure to install the modem/NIC cable.