Compaq Presario 1000 HP Compaq Business Notebook nx7000/Compaq Presario Widesc - Page 119

slot board cable ground loop to the notebook., Remove the SD Card slot board and cable.

Page 119 highlights

Removal and Replacement Procedures 2. Disconnect the SD Card slot board cable 1 from the system board. 3. Remove the PM2.5×5.0 screw 2 that secures the SD Card slot board to the notebook. 4. Remove the PM2.5×5.0 screw 3 that secures the SD Card slot board cable ground loop to the notebook. 5. Remove the SD Card slot board and cable. Removing the SD Card Slot Board and Cable Reverse the above procedure to install the SD Card slot board and cable. 5-36 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174

5–36
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the SD Card slot board cable
1
from the system
board.
3. Remove the PM2.5×5.0 screw
2
that secures the SD Card
slot board to the notebook.
4. Remove the PM2.5×5.0 screw
3
that secures the SD Card
slot board cable ground loop to the notebook.
5. Remove the SD Card slot board and cable.
Removing the SD Card Slot Board and Cable
Reverse the above procedure to install the SD Card slot board and
cable.