Compaq Presario 1000 HP Compaq Business Notebook nx7000/Compaq Presario Widesc - Page 125
slot board cable ground loop to the base enclosure and the, PM2.5×5.0 screw
View all Compaq Presario 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 2. Disconnect the SD Card slot board cable 1 from the system board. 3. Remove the PM2.5×5.0 screw 2 that secures the SD Card slot board cable ground loop to the base enclosure and the PM2.5×5.0 screw 3 that secures the system board to the base enclosure. Removing the System Board Screws 5-42 Maintenance and Service Guide
5–42
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the SD Card slot board cable
1
from the system
board.
3. Remove the PM2.5×5.0 screw
2
that secures the SD Card
slot board cable ground loop to the base enclosure and the
PM2.5×5.0 screw
3
that secures the system board to the base
enclosure.
Removing the System Board Screws