Compaq Presario 1000 HP Compaq Business Notebook nx7000/Compaq Presario Widesc - Page 121
Remove the PM2.5×15.0, Remove the VGA board and shield
View all Compaq Presario 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Removal and Replacement Procedures 2. Remove the PM2.5×15.0 1 and PM2.0×3.0 2 screws that secure the VGA board shield to the base enclosure. 3. Lift the upper left corner of the VGA board 3 to disconnect it from the system board. 4. Remove the VGA board and shield 4. 5. Disengage the shield clips 5 to remove the VGA board from the shield. Removing the VGA Board and Shield 5-38 Maintenance and Service Guide
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the PM2.5×15.0
1
and PM2.0×3.0
2
screws that
secure the VGA board shield to the base enclosure.
3.
Lift the upper left corner of the VGA board
3
to disconnect it
from the system board.
4. Remove the VGA board and shield
4
.
5. Disengage the shield clips
5
to remove the VGA board from
the shield.
Removing the VGA Board and Shield