Compaq Presario 2200 Startup Guide - Page 35

Power and Battery Pack Problems, If the Notebook Turns Off Immediately After It Turns

Page 35 highlights

Troubleshooting Power and Battery Pack Problems If the Notebook Turns Off Immediately After It Turns On Battery power is probably extremely low. Plug in the AC adapter or insert a charged battery pack. If the Notebook Keeps Beeping The notebook beeps repeatedly or displays a warning when battery power is low. Save your work, shut down Windows immediately, and insert a charged battery pack or plug in the AC adapter. If the Battery Pack Does Not Charge ■ Make sure the AC adapter is fully plugged into the power source and the notebook, and that the light on the adapter is on. ■ If you are using a power strip, remove the AC adapter from the power strip and plug it directly into a wall outlet. ■ Make sure the battery pack is fully installed and locked in place. ■ Make sure you are using only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Do not use a 60-watt, 3.16-amp adapter. ■ Move the notebook away from any nearby heat source. Unplug the AC adapter and allow the battery pack to cool down. If the battery pack gets too hot, it will not charge properly. ■ If available, try another battery pack and AC adapter. Startup Guide 4-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

Troubleshooting
Startup Guide
4–5
Power and Battery Pack Problems
If the Notebook Turns Off Immediately After It
Turns On
Battery power is probably extremely low. Plug in the AC adapter
or insert a charged battery pack.
If the Notebook Keeps Beeping
The notebook beeps repeatedly or displays a warning when
battery power is low. Save your work, shut down Windows
immediately, and insert a charged battery pack or plug in the
AC adapter.
If the Battery Pack Does Not Charge
Make sure the AC adapter is fully plugged into the
power source and the notebook, and that the light on
the adapter is on.
If you are using a power strip, remove the AC adapter from
the power strip and plug it directly into a wall outlet.
Make sure the battery pack is fully installed and locked in
place.
Make sure you are using only the AC adapter included with
your notebook (or other approved adapter that meets the
power requirements of the notebook). Do
not
use a 60-watt,
3.16-amp adapter.
Move the notebook away from any nearby heat source.
Unplug the AC adapter and allow the battery pack to cool
down. If the battery pack gets too hot, it will not charge
properly.
If available, try another battery pack and AC adapter.