Compaq Presario SR1000 Getting Started Guide - Page 21
Connecting the speaker system to the PC 6-connector, Side speaker
View all Compaq Presario SR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
A Side speaker port (side) B Rear speaker port (rear) C Center speaker/ subwoofer port (c/sub) D Microphone (mic) E Audio line out (out) for front speakers F Audio line in (in) The connectors for the 6-connector multi-channel speaker system are on the back of the PC. A B C D E F Connecting the speaker system to the PC (6-connector) 1 With the speaker system off, assemble the speakers and, if used, the subwoofer. Refer to the speaker documentation. 2 Turn off the PC. 3 Connect the audio cable plugs from the speaker system subwoofer to the connectors on the back of the PC. (See the following table.) Connect speaker cable (plug) for: To PC port (label, name, color): Front speakers (or two stereo speakers) Audio line out (E, out, lime green) Side speakers Side speaker (A, side, gray) Rear speakers Rear speaker (B, rear, black) Center speaker/subwoofer Center speaker/subwoofer (C, c/sub, gold) 4 Turn on the PC. 5 Turn on the speaker system. 6 Configure the audio output for this 6-connector multi-channel speaker system by performing the following procedure. Setting Up Sound 15