Compaq ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 25
Installing the New I/O Module, of this guide.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 21 4. Install any new PCI/PCI-X expansion boards at this time (only if performing upgrade Method 1). 5. Insert an expansion board into the appropriate expansion slot , pushing firmly until the board is seated properly. IMPORTANT: If performing the upgrade Method 2, place the I/O expansion boards in the same slots in the new I/O module as they were in the existing I/O module. 6. Close the air baffle . 7. Close the expansion slot release lever . 3 1 2 Figure 12. Inserting the PCI/PCI-X expansion board 8. Replace any expansion boards removed from slots 10 and 11. 9. Repeat steps 1 through 6 for the remaining expansion boards. 10. If no Remote Insight Lights-Out Edition board will be installed, proceed to the "Installing the New I/O Module" section of this guide.