Compaq ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 42

pull the end of cable segment B

Page 42 highlights

38 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 5. Remove the power supplies located under the I/O module on the rear of the server to gain access to cable segment B. 6. Viewing the server from the rear, remove the cable guide with Velcro from the back of the vertical wall of the system midplane board, adjacent to the left server wall. Figure 30. Removing cable guide from system midplane 7. Viewing the server from the front, pull the end of cable segment B closest to the cable guide with Velcro through the right vent hole in the system midplane board and down toward the media module area. Cable segment B is now removed. Figure 31. Removing cable segment B 8. Slide the media module back into the server.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

38
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide
5. Remove the power supplies located under the I/O module on the rear of
the server to gain access to cable segment B.
6. Viewing the server from the rear, remove the cable guide with Velcro
from the back of the vertical wall of the system midplane board,
adjacent to the left server wall.
Figure 30.
Removing cable guide from system midplane
7. Viewing the server from the front
,
pull the end of cable segment B
closest to the cable guide with Velcro through the right vent hole in the
system midplane board and down toward the media module area.
Cable segment B is now removed.
Figure 31.
Removing cable segment B
8. Slide the media module back into the server.