Compaq ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 8
Preparing the Server, Selecting an Upgrade Method
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide Preparing the Server This section explains the two upgrade methods that can be used. Also, the procedures necessary to prepare the existing server for the upgrade are discussed in this section. Selecting an Upgrade Method The I/O module upgrade can be performed by either of two methods. The method to use depends on the existing server setup. IMPORTANT: Using Method 1 is strongly recommended. Reinstalling the operating system using the SmartStart for Servers 5.0 CD results in a cleaner upgrade. I Method 1-This method is the preferred method. It involves reinstalling the supported operating system using SmartStart for Servers 5.0. I Method 2-This method involves keeping the same supported operating system, but updating the System Partition with the System Dispatcher and Compaq Server Diagnostics utilities, updating the drivers, and updating the Compaq Insight Manager™ Console using the Compaq Management 5.0 CD. Use Table 1 to determine the supported operating systems for the ProLiant DL760 server and Table 2 to determine the upgrade method to use. Table 1 Supported Operating Systems. Operating System Vendor Microsoft Novell SCO Version Windows NT Server 4.0 Windows NT Server 4.0 Enterprise Edition Windows 2000 Advanced Server Windows 2000 Server NetWare 4.2 SMP NetWare 4.2 NetWare 5 and 5.1 UnixWare 7.1.2