Compaq nc6000 HP Compaq nc6000 Notebook PC - Maintenance and Service Guide - Page 125
Note that the gold triangle, on the processor should be aligned
View all Compaq nc6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 2. Use a flat-bladed screwdriver to turn the processor lock screw one-quarter turn counterclockwise 1 to release the processor from the socket. 3. Lift the processor straight up 2 to remove it. ✎ Note that the gold triangle 3 on the processor should be aligned in the lower right corner when you install the processor. Removing the Processor Reverse the above procedure to install the processor. Maintenance and Service Guide 5-39
Removal and Replacement Procedures
Maintenance and Service Guide
5–39
2.
Use a flat-bladed screwdriver to turn the processor lock screw
one-quarter turn counterclockwise
1
to release the processor
from the socket.
3. Lift the processor straight up
2
to remove it.
✎
Note that the gold triangle
3
on the processor should be aligned
in the lower right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.