Compaq nc6000 HP Compaq nc6000 Notebook PC - Maintenance and Service Guide - Page 141
Use a 5.0-mm socket to remove the two HM2.5×9.0, that secure the system board to the notebook.
View all Compaq nc6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Removal and Replacement Procedures 2. Disconnect the speaker cable 1. 3. Remove the five T8M2.5×5.0 screws 2 that secure the system board to the notebook. 4. Use a 5.0-mm socket to remove the two HM2.5×9.0 standoffs 3 that secure the system board to the notebook. Removing the System Board Screws and Standoffs Maintenance and Service Guide 5-55
Removal and Replacement Procedures
Maintenance and Service Guide
5–55
2. Disconnect the speaker cable
1
.
3. Remove the five T8M2.5×5.0 screws
2
that secure the
system board to the notebook.
4. Use a 5.0-mm socket to remove the two HM2.5×9.0
standoffs
3
that secure the system board to the notebook.
Removing the System Board Screws and Standoffs