Cuisinart EM-25 User Manual - Page 10
Troubleshooting
View all Cuisinart EM-25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TROUBLESHOOTING Problem: Machine does not have power. Solution: • Make sure the cord is securely plugged into the unit and outlet. • Reset your home's circuit breaker. • Confirm the power has been turned on and the controls and LCD are illuminated. Problem: Machine will not brew. Solution: • Turn off and unplug the machine for 30 seconds or more. When you plug the machine back in, be sure to turn the power back on. • Make sure there is water in the reservoir. • Make sure the reservoir is properly installed. • Make sure brew head is completely closed. Problem: C hlorine or mineral taste in coffee. Solution: • Consider using bottled or filtered water. Problem: D oesn't brew a full cup. Solution: • Turn off and unplug the machine for 30 seconds or more. When you plug the machine back in, be sure to turn the power back on. • Decalcify the machine (refer to page 9). Problem: The used capsule will not fall into the capsule container. Solution: • Check to see if the capsule container is full. Empty the capsule container and then try again. (You may need to manually remove the used capsule from the brew head.) Problem: I want to reset the Espresso/ Cappuccino/Latte programming. Solution: • See page 7 for instructions. Problem: Machine turned off. Solution: • The machine's energy-save mode puts unit to sleep after 30 minutes of nonuse. Simply lift the brew head lever up to "wake up" the unit, or switch unit off and on again. Problem: Espresso is too hot or not hot enough. Solution: • See page 7 for setting your brew temperature. Problem: Milk does not froth. • First, try removing silver pin from top of frothing mechanism. Wipe or rinse pin and replace in unit. • If problem still persists, clean the steam/ frothing wand. See page 9 for instructions. Problem: Espresso is not hot enough. Solution: • Heat your cup prior to use by filling with hot tap water. Let it rest for 10 seconds and then empty prior to making coffee. Problem: The indicator light will illuminate, but espresso does not flow. Solution: • The espresso dispensing nozzle is clogged. The loaded espresso capsule can be damaged. Wait for a short period of time before opening the lever and then try with a new capsule. Make sure, that the lever is closed. Problem: Produced little or no crema. Solution: • Coffee has natural-occurring oils which may clog the espresso nozzle. To clean, regularly run a brew cycle with water only. Problem: The water does not flow through the espresso dispensing nozzle. Solution: • Coffee has natural-occurring oils which may clog the espresso nozzle. To clean, regularly run a brew cycle with water only. Problem: The brew button flashes for a long time. When is the espresso machine ready for use? Solution: • The espresso machine takes approximately 2.5 minutes to heat up. 10