D-Link DCS-2000 Product Manual - Page 118
Schedule Video Recording with Motion Detection
View all D-Link DCS-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Schedule Video Recording with Motion Detection To schedule video recording with motion detection, you must first enable motion detection on the Internet Camera. Click the Motion Detection button under the Advanced tab from the Configuration screen to access settings that affect how the DCS-2000 Internet Camera can serve as a security device by recording only when motion is detected. Note: These settings can be configured in your Web browser and while logged into the IP surveillance Program. Click Motion Detection In this window, follow the steps below to ensure that motion detection is correctly enabled: Check "Enable motion detection." Click on "New" to have a new window to monitor video. Enter in a window name. Adjust the "Sensitivity" and "Percentage" levels according to the local environment. The highest sensitivity and lowest percentage provides the most sensitive setting. 5 After adding the motion window, click on save to enable the activity display. You can add up to 3 motion windows to trigger recording. For detailed information about each setting, please refer to Configuration > Advanced > Motion Detection in the section titled "Using the DCS-2000 With an Internet Browser" (page 47). Next, run the IP surveillance program. Click on the Configurations button and select Scheduler. 118